[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: diameter of stock 16v exhaust?
SNixon5523@aol.com wrote:
>
> I thought stock was 2.25"? I upgraded only the muffler on mine with 2.25"
> inlet/outlet and had no problems mating it up.
>
> Anyone can correct me if I am wrong.
>
> Stewart
>
> --
> Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
i know it's more than 2", i thought it was 2.25". i measured it with a
caliper when i had to get a new muffler. i measured around the
_outside_. the inside diameter is probably 2.125", like someone else
mentioned. usually, thought, exhuast systems are advertised with their
outside diameter. look in the techtonics catalog...
chris
86 16V scirocco
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org