[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Rear Axle Beam!
On Thu, 22 Jun 2000 13:53:08 -0300 "Sal Guzzo" <pellom@yorku.ca> writes:
> Peter,
>
> Glad to see that I was thinking along the same lines as you are.
> Here's what I plan to do and I'm almost there.
>
> -Complete Scirocco 16V brakes
> -22mm m/c, brake booster, and the two propotioning valves at the
> m/c (are there any others?)
Nope...
> -Stainless steel brake lines up front and in the rear.
> -New oem rotors with mintex redbox pads
> -I'll be using the Rabbit rear axle, sandblast it and fit the brakes
> on it prior to installing it on the car.
> -16V e-brake lines
>
> The following are items which I'm not sure whether I need to fit
> onto the Mk1 rocco.
> -16V e-brake handle
Not necessary...
> -16V pedal cluster (can I merely retain the original one)
>
> Thanks for any suggestions or criticism.
>
> Sal Guzzo
If you are swapping in the 22 mm M/cyl, you will need the pedal cluster
or you'll have to rig a brake light switch.
Peter
'79 Scirocco 16V project car
'83 GTI
'84 Scirocco, '80 Scirocco, '88 Scirocco 16V
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org