Re: AAAAAHHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!

[Anthony Pelletier <vwnuts@yahoo.com>]

actually what probably happened is that you have an 8v
(24 teeth) trans in a 16v car (usually has 28 teeth.)
they will fit over but not enough to move the car just
enough to make a lot of noise...

--- Anthony Pelletier <vwnuts@yahoo.com> wrote:
> 
> Sounds like you may have put an 8v disk on a 16v
> tranny.  If it only does this when the clutch is
> depressed it sounds like the problem.  What are you
> running for a tranny?  It won't even move right?  It
> sounds like the wrong disk.  I know BTDT-it sucks
> cause you are going to haul out the tranny.  I never
> used clutch disks given to me by friends anymore... 
> 
> 
> 8v mainshaft has 24 teeth
> 16v mainshaft has 28 teeth
> 
> hth
> Tony
> 
> 
> --- Jason Arms <redbug64@hotmail.com> wrote:
> > Listers,
> > 
> > Whell this weekend i put in my new clutch kit and
> > throughout bearing kit 
> > into my '87 16v rocco.  I got everything apart,
> > installed all the seals, put 
> > the new clutch in, put the new throughout bearing
> > in, reinsatlled the 
> > tranny, and hooked everything back up.  I started
> > the car with the clutch 
> > in.  When i put it into gear and started to let
> the
> > clutch out, i hear the 
> > most awfuel sound that i have ever heard in my
> life,
> > i push the clutch back 
> > in and it doesn't stop!  So i shut the car off. 
> > Next i start the car out of 
> > gear with the clutch out, no noise.  i push the
> > clutch in and i makes the 
> > same goddamn noise!  It sounds like maybee the
> > splines on the tranny output 
> > shaft not meeting up wiht the teeth on the clutch
> > disk????  I took my clutch 
> > alignment tool and matched it up to a parts 8v
> motor
> > that still had the 
> > flywheel on it, it matched up perfict, but it also
> > matched up perfict to my 
> > 16v?????  (not 100% positive about this cause my
> > friend acctually put the 
> > alignment tool on the 16v.)  If anyone has
> > experenced this before, please 
> > GOD email me back so i can figure this out pronto!
> 
> > I really hope that Mark 
> > at Adarondack did not send me the wrong clutch or
> > alignment tool, but afaik 
> > every vw part should fit together!  I really don't
> > understand what is going 
> > on here, can someone help me before i commit
> > scuiside?
> > 
> > Jason Arms (Essex, VT)
> > 
> > '87 Scirocco 16v 
> > AAAAAAAAAAHHHHHHHHHHHHHHHHHHHHHHH!!!!!!!!!
> > '64 Sunroof Beetle (livin a new life)
> > '84 Rabbit GTI RIP
> > '84 Jetta GLI (Now dubbed the POS!)
> > '84 Jetta GLI (parts car)RIP
> > My web page (work in progress!)  
> >
> http://www.crosswinds.net/~xscirocco16vx/index.html
> > 
> >
>
________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
> > http://www.hotmail.com
> > 
> > 
> > --
> > Email problems to: scirocco-l-probs@scirocco.org 
> To
> > unsubscibe send
> > "unsubscribe scirocco-l" in the message to
> > majordomo@scirocco.org
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Get Yahoo! Mail – Free email you can access from
> anywhere!
> http://mail.yahoo.com/
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To
> unsubscibe send
> "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
> 


__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail – Free email you can access from anywhere!
http://mail.yahoo.com/

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org