[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: thermo-time switch location on 8V

To: Chris DeLong <green536@hotmail.com>
Subject: Re: thermo-time switch location on 8V
From: Oliver Seiler <oseiler@acm.org>
Date: Tue, 25 Jan 2000 23:53:29 -0800 (PST)
cc: scirocco-l@scirocco.org
In-Reply-To: <20000126043527.24688.qmail@hotmail.com>
Sender: owner-scirocco-l@scirocco.org

On Wed, 26 Jan 2000, Chris DeLong wrote:

> [...] 
> The thermo time switch gives the cold start valve ground; NOT power.

Just telling it from the Bentley manual... they may contradict themselves
later, though...

-Oliver

Oliver Seiler -- Software Developer, Pivotal Software, http://www.pivotal.com
    Scirocco MkII Diary - http://erisian.com/~oseiler/scirocco/index.html


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org

References:
- Re: thermo-time switch location on 8V
  - From: "Chris DeLong" <green536@hotmail.com>

Prev by Date: Roc Jams 2
Next by Date: Re: thermo-time switch location on 8V
Prev by thread: Re: thermo-time switch location on 8V
Next by thread: Re: thermo-time switch location on 8V
Index(es):
- Date
- Thread