Re: 90 to 100mm cv conversion help

["Chris DeLong" <green536@hotmail.com>]

>The easiest way is to get 2 wheelbearing housings from an '85 and up
>Scirocco or Cabriolet.


This seems to be a common misconception as to which wheel bearing housings 
are compatible with 100mm axles. '79-92 A1 drivetrain cars are all the same 
when it comees to wheel bearing housings. Even if you are using 10.1" brakes 
or you have 90mm cv joints. It doesnt matter cause they are all the same 
part #. Hope this helps for all of you out there thinking of brakes and 
bigger axles.

Chris DeLong
ICQ#45030867
Seattle, WA USA
'80 16V Rag
'80 Rocco (new!)
'65 Bus (ugly, but good for campin' W/toaster oven)
'82 GLI (now with a happy shaved, solenoid operated trunk)
'80 'Vert
'61 17 Window
'78 Scirocco


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org