[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [mk2] interior door panels
When I covered mine in leather, I used a hot glue gun with a mixture of
the low and high temp glue. I made a piece that fit the contour of the
panels (1 for each side) and quickly ran the glue all around the backside
of the panel. Then I pressed the insert into place. It was a pain in the
ass building those things but it has held up for 3 years now.
Eric
Good, bad...I'm the guy with the gun.
> foxxinabox@core.com wrote:
>
> > anyone have a set of these in good condition or know of a way to
> > attach the inner, armrest piece to the main panel? i've tried
> super
> > glue, hot glue gun, even epoxy, but have had no luck. if you've
> got
> > tips, forward 'em, please. if you've got 'em to sell, i'm looking
> for
> > ones with either grey or black inset for manual windows. thanx.
> >
> > --
> > /\_/\ Foxx (in a box)
> > < o o > http://foxx.tripod.com
> > \ /
> > °
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org