Re: Rear disks and wheel bearings

[Shawn C Meze <skerocdriver@juno.com>]

On Tue, 1 Aug 2000 23:23:11 -0300 "Sal Guzzo" <pellom@yorku.ca> writes:
>How on earth do I press in the wheel bearings into the rear disks?
>Actually, I know HOW to press them in, but I need to know what gets
pressed
>into where? That is, which parts get pressed in which order and where
does
>the final seal (the one which looks like a cam seal) get pressed?  TIA


Simple. Remove the hub and look at what you got. The outter race is what
you press into the hub. The inner bearing has a grease seal. The bearing
is under that ane the race is beneath that. Remove and install. GL!


Shawn Meze
86' Jetta GLi 8V                   84' Scirocco 8V <--NEW
82' Scirocco GTi -FSP 30-   81' future "Project Scirocco FSP"
The Fastest, Quickest, Cleanest and best looking Scirocco in all of San
Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org