Re: rear fogs/taillight pinstripes

["Casey Webster" <tinfool@home.com>]

Thanks to all who replied to my tailight pinstriping question.....I decided
to use the stick on stuff the 1/8" single pinstriping works great.....takes
a while though.....about 30-40 minutes per side.  I don't know how well this
will stand up, but I can always easily replace it.

Casey
84 Roc



; the 1/8" stripe is all I used tho.  Run the smaller stripe, when
> you remove the cover tape, remove the larger stripe with it.  On each
> subsequent stripe, align the larger stripe either right below the last
> smaller stripe (for a larger gap between stripes) or at the top of the
> smaller stripe (for a smaller gap between stripes).  Don't forget to take
off
> the clear cover tape and the larger stripe.  It's time consuming, but you
> don't need to worry about overspray, and you can do it with the lights on
the
> car, although it's easier with them off.  And if a stripe gets messed up
over
> time, you simply remove the old one and lay down a new stripe.



--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org