Re: Scirocco Owners need to Fabricate our Own Parts.

[Brett Van Sprewenburg <brett@netacc.net>]

<x-flowed>> I too was hoping the emails would have something to do with the 
>subject.  I have been thinking about machining some parts, but I 
>need to come up with some ideas as what to machine, as well as the 
>specs.  If I had some ideas and specs, I could write a program to 
>machine the part.  One of my old bosses started his machine shop 
>because he couldn't afford to buy parts for his racecar anymore. 
>Now he make parts for not only his racecar, but for other racecars 
>and experimental airplanes as well.  If I wrote a program or two, 
>I'm sure he'd let me run the parts.  Or I could run the program at 
>my old school.
>
> So.....if anyone has any ideas....email me.
>

Upper spring perch lowering caps.  Allows the spring to seat further
up towards the bearing, which lowers the car without sacrificing any
travel.  If you want to work in delrin, A-arm bushings are in order,
as well as rear twist beam axle bushings.  If you want to get fancy,
do up some nice camber plates.  Another fancy one would be adjustable
cam gears...

Thoughts, or possibilities?

==Brett

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '85 Scirocco (Winter) | - brett@netacc.net

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org


</x-flowed>