Re: Engine Bolts

[Brett Van Sprewenburg <brett@netacc.net>]

>It seems to me like this question floated around about 6 months ago, but
>I can't find it in my archives..
>
>Is there anyplace out there that has engine accessory bolt sizes and
>locations listed??
>
>I am in the process of rebuilding a 1.8 16v and as luck would have it,
>some of the bolts are really rusted, snapped off, etc...
>
>I would like to change them all to new, but don't want to go to the
>dealer to get these..
>
>Any help would be appreciated..
>
>doug

My advice would be...to go to the dealer and get them. :)  You know
they're (probably) right, you can get them all in one place, and they'll
only cost 20%-50% more then someplace else.  What could be better?

==Brett

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '85 Scirocco (Winter) | - brett@netacc.net



--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org