Re: More Performance

[tedgroth@webtv.net (ted groth)]

When I bought it the shifter ball assembly was in pieces and the shifter
was about ready to fall completely out the bottom.  I replaced the ball
assembly, it cost me more then the car did. I only paid $50 for the car
and the ball assembly cost me $56.  The guys wife made him sell the
car(fast). I was hoping that was the only problem, so  I put the ball
assembly in, still no fourth or fifth. next I checked the linage
underneath ever thing looked ok. I checked the fluid in the trany. There
was nothing at the fill plug so I pulled the drain plug, there was about
three drops. I  pulled the trany and one of the front seals was leaking,
the clutch was shot from the gear lube. I've got a friend who has a good
trany for $100.

I ordered a K&N filter it should be in tomorrow. Where can I get a cam?
and what size should I go, lift and duration, etc. 

Thanks for the help.

Ted G.
86 Scirocco 8V 


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org