Re: 2.0 bottom end rebuild

[Shannon Fenton <sfenton@telegroup.com>]

I put new rod and main bearings in my 16V and it was not fun with the motor
in the car. If you have the motor out of the car its not too bad. The
thrust washers are just bearings with a lip.


At 11:18 AM 7/29/99 -0500, Robert Bisch wrote:
>Anyone totally rebuilt the bottom end of a 2.0 block.  I have a line on one,
>but the thrust washers need replaced and since I'm that far I would
>rebuild everything.  Anyone ever done this, and/or would not recommend
>a motor that need the thrust washers replaced.  Thanks for the help.
>
>Rob
>88 16v






Thank You for your Time,
     Shannon Fenton
	Retail/Carrier Technical Analyst
	Solutions On-Line Web Maintenance 
	On-Line Network Documentation
	e-page 1823030@reliablemessaging.net
          Telegroup Trouble Analysis Group
           sfenton@telegroup.com

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org