Re: Getting rid of my AC

[dcewing1 <dcewing1@cwix.com>]

When I put my 16v into my Rabbit (No, I don't have a scirocco), I just
removed the A/C compressor, kept the bracket, slightly modified a MK1 alt.
pulley (since they are very deep, I don't know, I think the one I used had
A/C) and with my set up I got rid of the P/S also so I measured and found
the right belt for Crank/Alt/Waterpump.  There is one
other option and one possible.  1.  Change the Alt/ac bracket--the only
problem with this is I have never heard of or seen a stock scirocco or GTI
16v without A/C!  2. Try to mount the bracket from an 8 valve.  The only
problem with this is you'll have to change the Alt too and probably have to
change the upper bracket.

I tried to put my 8v stuff on my 16v before I put the motor in but it didn't
work for some reason, so I used the bracket with A/C and just got rid of the
compressor.

Hope this helps!

Dave
77 Rabbit 16v soon to be 2.0L


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org