[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: CO% Idle Mixture Adjustment(Permatune?)
John C. Worden wrote:
> At 08:48 PM 1/22/99 -0500, PreCORRADO@aol.com wrote:
> >I know l know... the manuals say dealer only and the tool is very expensive.
> >But we all know it is a 3mm allen screw that is readily accessable
> especially
> >on 16valves. My question is ; how can l adjust the mixture to the correct
> >setting now that l have made engine modifications. Obviously l don't have an
> >exhaust gas analizer ( that would be too easy ). So what l'm getting at is
> how
> >to do it in my garage? Can l read the plugs, sniff the exhaust, road test
> >it, guess and check making a log of my experiments, or what!
> >
> >Give me your ideas, l feel that this aplies to most of us since we all love
> >mods :-)
> >
> >Marco 88 16V
> >
> You could buy a Permatune. They sell for around $50. It is a clear
> sparkplug that you install and make your adjustments until the color of the
> flame is what the instructions indicate it should be. When you are done
> you put the real plug back in. I haven't actually tried one, but will
> probably buy one at some point. Anybody out there have any experience with
> these?
>
> John Worden
> Old Town, ME.
> '98 Dakota cc Sport 4x4, 3.9 auto, Intense Blue,
> '84 Scirocco (under construction) Brakes and Suspension currently
> '69 MGB Roadster(in need of restoration)
Is it available for all vehicles ???
where can it be purchased from ???
--
========================================================================
| Etop Udoh | Southern Polytechnic State University [89-##] |
| P.O. Box 4234 | HTTP://Personal.atl.bellsouth.net/~s_druid |
| Marietta, Ga 30061 | << s_druid@bellsouth.net >> |
| "IF YOU AIN'T GOT NOTHING, YOU GOT NOTHING TO LOSE..." |
========================================================================
--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org