Re: couple questions

[SCIROCCO87@aol.com]

In a message dated 1/10/99 1:31:05 PM Eastern Standard Time,
tberk@mindspring.com writes:

<< I don't think the 82+ models use the early type valve to control heat. I
 think they use a flap system to close off air flow past the heater core.
 These flaps are controlled by vacuum generated by the engine. Possibly the
 control arm has fallen off the flap's lever. Perhaps there is a vacuum leak. 
 
 Good luch, hth,
 TBerk >>
My 8716V has the valve in the engine compartment.  trust me.  This fall mine
decided to stick open and I had heat when I wanted AC.  Easy fix.
Dan May
8716VScirocco 95.5Tacoma4x4
http://members.aol.com/scirocco87

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org