Re: tranny thang

[skerocdriver@juno.com (Shawn C Meze)]

On Sun, 3 Jan 1999 10:19:22 -0500 "faust" <faust@gateway.net> writes:
> this is what I did when I put
>a 9A into my 86 jetta that originally came with 90mm, but my cvs were
>getting bad anyhow.


Your 86 Jetta came with 90mm flanges? Hmm, not mine. 


>Putting the 90mm flagnes should be pretty easy.  You'll need two seal 
>kits and a flange installation tool.  They should just swap in.  


You dont really need the seal kits but for $10 each, its money well
spent. Especially if you cant get the clips off without hyper extending
them. (bending them) They will swap easily. The hard part is getting the
flange compressed enough to get the clip off. Not hard if you have the
tool. 


>You'll have to
>remove the green tin sleeves, 


Why? The green tin doenst need to be removed, if you get the seal kit,
just remove the seal from the green tin and reinstall a new seal.  


>but there may be special ones for 90mm, 
>I can't remember.  Anyone?  I've never put 90mm on a box that came with
>100mm, but I have put 100mm on a box that came with 90s.


Its all the same between the 90mm and the 100mm flanges. 100%
interchangability. 


              Shawn Meze
86' Jetta GLi           82' Scirocco GTi
The Fastest, Quickest, Cleanest and
best looking Scirocco in all of San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.