Re: Changed man and questions

[Brett Van Sprewenburg <brett@netacc.net>]

>At 01:35 AM 2/28/99 -0500, you wrote:
>>So my first question is, I have your basic set of tools now, but
>>what other tools should I look in to getting soon?  Should i get a
>>test-light, volt meter,etc....what?
>

[good tool list from Brad deleted]

In addition, I would probably add:  some quailty ViceGrip brand pliers,
and some needle nose, wire cutters/strippers, steel and brass drifts,
large steel punch, snap ring pliers, 5lb hand sledge, 1/2in breaker bar,
6mm, 7mm, & 8mm 3/8 drive hex sockets.

If you are going to be very ambitious, I would add:

12mm triple square tool, soldering iron, Dremel with cut off wheels & grinders,
spring compressors for MacPherson struts, 5in vice mounted to an immovable
object (I attached mine to a wall in my garage, I can shake half the house
with it. :) ), power drill with tons-o-bits, torque wrench (up to 75lbs gets
99% of the bolts on the car), AIR TOOLS!!

There's probably more...

Oh, and the axle nuts are 30mm.

==Brett




 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '85 Scirocco (Winter) | - brett@netacc.net



--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org