[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE:16v Distributor
The oil seal on the rotor goes bad. Its a 16V thing. Unfortunately it requires
replacment of the whole distributer assembly shaft and all. The other culprit
could be the gasket in between the two. Mine was the rotor though and it worked
out to be cheaper to replace cap and all. HTH.
Thank You for Your Time,
Shannon Fenton
North American Frontline Resolution
sfenton@telegroup.com
------------------------------
Date: 2/25/99 2:17 PM
To: Fenton, Shannon
From: Honnold, Brian
My recently acquired 1.8 head showed some signs of oil in the #3 plug hole
above the plug like all over the connector and some oil in the distributor
Being a 8V guy I am at a loss as to what causes these problems and how to
fix them...........anyone
Brian Honnold
'78 Rocco Ragtop
--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org
--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org