RE: more information

["Ryan Schuermann" <rts@nol.net>]

hrm oh ok guess i'll go re-replace the coil and plugs and cap....


Ryan

> Dont know if this matters but there may be a difference between K-Jet which 
> is on the 86 Roc and CIS-Lambda on the 81 S Roc.  Something that would 
> cause a severe shortage of fuel.
> 
> Also, I don't believe that the 86 pin style coil is a suitable replacement 
> for the 81 S
> 
> Brian Honnold
> '78 Rocco Ragtop
> 
> On Tuesday, February 02, 1999 7:08 AM, Ryan Schuermann [SMTP:rts@nol.net] 
> wrote:
> > ok the fuel dis im using is out of a cis-lambda, i remember vaguely
> > having to replace the lambda sensor on that rocco, anyways it has
> > been sitting in my garage for about 2 years, it is injecting gasoline
> > in all 4cyl plus cold start, not much but a trace. I got a tablespoon
> > out of the 5th injector after cranking 5 times. the plate moves
> > freely, everything was working prior to the swap, i have replaced the
> > ciol with a better one (new plug wire style and also updated the cap
> > and installed a new rotor.
> >
> > my main problem here is the fuel being injected, its not suppose to
> > be, someone suggested my o-rings in the dist prob dried up and are
> > lettign the gasoline past, which is prob right, which really sucks.
> > so i guess its back to the teeny air flow plate. bah a whole day
> > wasted. i guess a 16v distributor wouldnt work would it? it looks
> > quite different. can this 8v large air plate fuel distributor be
> > repaired?
> >
> > thanks for all your help guys
> >
> > Ryan
> >
> > --
> > To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
> > If you experience other problems, email: scirocco-l-probs@scirocco.org
> 
> 

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org