Re: Wiring Harness to Radiator

[Jim Jarrett <jarrett@rpa.net>]

<x-flowed>At 5:18 PM -0800 12/23/99, Brad Sterling wrote:
>Hi all,
>
>	So the new water pump is in and I'm putting on the new, lower 
>temp, thermo
>switch prior to reinstalling everything when I notice just how screwed one
>of the wires to my wiring harness is.  The casing is all cracked and the
>wires are turning green.  Specifically, this is the wiring that connects the
>radiator fan to the radiator thermo switch to the relay.


Can't you just cut back to some decent wire, solder in a new piece 
and crimp on and solder a new spade connector?

I've had to do that before....it works.
/===============================================================\
| Jim Jarrett                      http://www2.rpa.net/~jarrett |
| mailto:jarrett@rpa.net                                        |
|                                                               |
|    Any problem can be solved with the proper application of   |
|   Force, Heat, Chemicals, or Money.                           |
\===============================================================/



--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org


</x-flowed>