Fw: 3-guage panel

["Emile & Jennifer Draper" <bybygti@foxinternet.net>]

OOPS!

The Autotech local number changed.  Now its
Local California phone and Tech Line # 949-240-4000
Sorry.

On the web page go to the catalog and look under gauges to find the "Gauge
Installation Panels".

Again HTH

Emile Draper
'80 'rocco

-----Original Message-----
From: Emile & Jennifer Draper <bybygti@foxinternet.net>
To: scirocco-l@scirocco.org <scirocco-l@scirocco.org>
Date: Friday, August 27, 1999 9:05 PM
Subject: Re: 3-guage panel


>Slim,
>    Yup Autotech has a web page and a phone number.  www.autotech.com and
>you can probably get a free catalog from them too.  I did.
>
>Local California phone and Tech Line # 714-240-4000
>Order Line # 1-800-553-1055
>
>hours M-Th 8:00-17:30 and F 8:00-17:00 Pacific Standard Time
>
>They use the standard VDO gage size.
>
>HTH
>
>Emile Draper
>'80 'rocco
>-----Original Message-----
>From: Slim <falzsf@home.com>
>To: Emile & Jennifer Draper <bybygti@foxinternet.net>
>Cc: Vaughn8v@aol.com <Vaughn8v@aol.com>; scirocco-l@scirocco.org
><scirocco-l@scirocco.org>
>Date: Friday, August 27, 1999 8:24 PM
>Subject: Re: 3-guage panel
>
>
>>Is autotech on the net at all? If not do you have a phone number for
>them!!! I
>>have been getting ready to cut up the ashtray on my 85 VW rocco.  What
size
>of
>>vdo gauges do you need for it?
>>
>>Emile & Jennifer Draper wrote:
>>
>>> Ben
>>>     Try Autotech for three hole gage panels.  Not sure if they still
>stock
>>> them but worth a try.  They have them for the stereo DIN opening and the
>>> ashtray opening on MK2 Scirocco's.  They run about $25, not cheap.  May
>try
>>> using some flat aluminum stock and paint it or polish it.
>>>
>>> Emile Draper
>>> '80 rocco
>>>
>>> -----Original Message-----
>>> From: Vaughn8v@aol.com <Vaughn8v@aol.com>
>>> To: scirocco-l@scirocco.org <scirocco-l@scirocco.org>
>>> Date: Sunday, August 22, 1999 6:55 PM
>>> Subject: 3-guage panel
>>>
>>> >I want that damn three-guage panel for my 16v!!  I seen Roccos with it
>and
>>> I
>>> >want it too dammit! :)  I heard from somebody that you can get it out
of
>an
>>> >Audi that would work...  I would like the kind that face towards the
>>> driver's
>>> >side of the vehicle...  Anyone know what I am talking about?
>>> >
>>> >
>>> >Ben
>>> >
>>> >--
>>> >To unsubscribe, send "unsubscribe scirocco-l" to
majordomo@scirocco.org.
>>> >If you experience other problems, email: scirocco-l-probs@scirocco.org
>>> >
>>>
>>> --
>>> To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
>>> If you experience other problems, email: scirocco-l-probs@scirocco.org
>>
>


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org