Re: Autotech Swaybar

["Wm. Josiah Erikson" <josiah@gsinet.net>]

Subframe for an A1? What? Tell me more....
    -Josiah
    '83 Scirocco (for parts)
    '84 GTi (needs fuel pump)
    '86 Scirocco 8v (broken frame)
    '87 QSW (daily driver)
    http://www.gsinet.net/~josiah

dalewitt wrote:

> addition of the complete subframe should eliminate any breaking of clamps.  I added the
> subframe to eliminate this very problem
>
> ----------
> > Which brackets are breaking?  I'm about to put on the 22mm front, 25mm rear
> > and the lower subframe.  I don't have the front mounts yet though so if
> > those are the ones that break what is the solution.?
> >
> > Brian Honnold
> > '78 Rocco Ragtop
> >
> > On Wednesday, September 02, 1998 5:32 AM, Brett VanSprewenburg
> > [SMTP:brett@kodak.com] wrote:
> > >
> > > >
>
> > > > Anyone have one of these? I looking at getting a 22mm for my 87 16V. I
> > remember
> > > > some time back a thread was going around about them breaking brackets.
> > If so
> > > > how was this resolved? Thanks guys!
> > > >
> > > > Thank You for Your Time, and soon to kicking ass in ES!
> > > >         Shannon Fenton
> > > >             Ext. 2712
> > >
> > > Yes, I've got the Autotech bars on my car, 22mm front, 25mm back.  I've
> > > broken 3 brackets so far, 2 stock and one of the HD SS Autotech brackets.
>
> > > I would suggest getting some of those _really_ heavy duty units machined
> > > from solid blocks of metal.  I think VL Enterprises makes/has this, check
> > > their web pages (probably a link on scirocco.org).  I'll be buying them
> > > myself at some point.
> > >
> > > ==Brett
> > > --
> > > To subscribe or unsubscribe, send email to
> > scirocco-L-request@scirocco.org,
> > > with your request (subscribe, unsubscribe) in the BODY of the message
> --
> To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> with your request (subscribe, unsubscribe) in the BODY of the message.



- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------