[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Supercharged vs. Turbo
- Subject: Re: Supercharged vs. Turbo
- From: Kevin <aventari@cts.com>
- Date: Wed, 21 Oct 1998 20:38:30 -0700
You dont need to change the pistons with a low boost system. I'm going to
run an 8psi turbo on stock Mahle HPC coated pistons (we'll see how this
works, but i think it will) my BAE turbo manual says the system can be used
on a stock engine. Granted it's not a good idea, you need to change a lot
of minor things, but pistons aren't one of them.
At 08:56 PM 10/21/98 -0700, you wrote:
>Well, you wouldn't exactly be able to "put one on" a 10:1 CR engine. If you
>want to play around with high compression boosting, a turbo is better for
>this. With a high CR engine, you get good low end torque and with mild
boost,
>this make a nice flat torque curve and less noticeable turbo lag (if any).
Of
>course, the pistons need to be changed to something forged with a really tall
>crown for heat dissipation. So this negates high compression boosting cause
>you might as well get low CR pistons. Unless of course you think the
benefits
>of a flat torque curve are worth it. My ideal setup from my research will
be a
>9:1 forged pistons(83mm -> 2L bottom) with a G60 supercharger. SC's give
good
>low end torque as well, so I don't need high compression for that, but I will
>have an amazing engine management system that I'm building and programming
>myself that can handle the fuel enrichment and boost retart. The one benefit
>of a 16V is the central location of the spark plug which helps prevent
>detonation therefore more spark advance available and more power.
>I'm thinking about .8-1.0bar boost is ideal for this application which just
>happens to be stock.
>Anyways, just my plans for the future..
>Ben
>1981 Scirocco-S 16V (lives again)
>
>Chris Chambers wrote:
>
>> ok as long as we are talking about superchargers, can you put one on
>> a 10:1 2.0l engine? That is what I have in my 85 Scirocco.
>>
>> Chris
>>
>> --
>> To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>> with your request (subscribe, unsubscribe) in the BODY of the message.
>
>
>
>--
>To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>
>
- --
Kevin Fry .:. 81 Scirocco S -- Now with JH power!
San Diego, CA
"If God had meant for us to use the metric system, we would've been born
with ten fingers and ten toes."
- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.
------------------------------