[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Relays again
- Subject: RE: Relays again
- From: Brian Honnold <bhonnold@pac-cap.com>
- Date: Fri, 16 Oct 1998 11:23:16 -0700
Mounting the relays is really easy,
All you have to do is get one more of those brakets that the fan relay
socket held by. Hook all the relay sockets to gether and put another
bracket on the other end. You end up with a nice clean row of 6 relays
right there behind the drivers headlights. one for fan, one for fogs, four
for lights.
Brian Honnold
'78 Rocco Ragtop
On Friday, October 16, 1998 10:55 AM, Ilias Glavinas
[SMTP:elias@tesla.wustl.edu] wrote:
>
>
> On Thu, 15 Oct 1998, Michael Helms wrote:
>
> > Hi everyone,
> >
> > I had a few requests about the proper wiring for the light relays. I
put
> > another page up on my website with comprehensive instructions.
> >
> > My URL is at the end of the note, as always. Go to my Scirocco
section,
> > into Performance Mods, and there's a new option ... "Illumination".
All
> > my pearls of wisdom about installing lighting relays are in there.
>
> I am about to add relays too, and I was told that the relays should be
> positioned as close as possible to the battery, to reduce the length of
> the wire and thus the voltage drop. Any particular advantage to the way
> you set it up? (ie, relays inside car). I apologize if I didn't notice
> it, but the way things are phrased in your page it seems like you have
> the relays under the dash.
>
> (In fact I went to junkyards and got me 2-3 of the relay holders that are
> found in Sciroccos mounted right in front of the battery, for the fan
> relay, in order to mount them next to the fan-relay holder and put the
light
> relays in there.)
>
>
> Ilias
> --
> To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
> with your request (subscribe, unsubscribe) in the BODY of the message.
- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.
------------------------------