Re: OXS sensor

[brett@kodak.com (Brett VanSprewenburg)]

> 
> I have determined tonight that my OXS sensor has gone bad.  My questions
> are.
> 1)  It's pretty easy to replace, isn't it/ Just the one nut?
> 2)  Do i have to buy a new sensor or can it be a used one?
> 3)  Whats it going to cost?
> 4)  Does it have to be a 16v, or can it be from any MkII scirocco?
> 
> Rich Deede

Yes just one nut, well two if count the one at the _other_ end of the wrench.

Buy a new one.  If it's for a 16v, the stock Bosch one can be kind of pricy.
It's a 3 wire unit, 1 sense wire, 2 for a heating element.  I hear that
a Ford 3 wire unit could work just as well.  Haven't tried this yet myself,
I'll probably just buy the correct one for peace of mind.  Mike or Mark will
be able to set you up.  I would think that due to the 3 wire vs 1 wire units,
that it might probably have to be designed for the 16v.

==Brett
- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------