RE: linkage, etc.

[Chris Coracini <Coracin@usdl.com>]

this is only held on by stretching it over a "lip" around the outside of
the hole it's covering.  wear goggles or something because you will get
a face full of dirt/grease when removing it.  it's very easy, just very
messy.

chris
86 16V scirocco

>----------
>From: 	Gerry Reichelt[SMTP:reichelt@telepath.com]
>Sent: 	Sunday, November 22, 1998 11:14 PM
>To: 	scirocco-l@scirocco.org
>Subject: 	linkage, etc.
>
>    How difficult is it to replace the large rubber boot underneath the
>shifter. Found a tear in mine, also the bushings on the main shaft (from
>the shifter to the linkage) are badly worn and sloppy. 
>Gerry
>
>--
>To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.