Re: sway bars, now body roll

["Ryan Schuermann" <rts@nol.net>]

umm excuse me, what bondo?? must be your head cracking, the car is 
all fiberglass chief.

Ryan

> must be the bondo that's cracking.....
> 
> 
> Owen wrote:
> > 
> > > I dont care what you think, you can't disprove me, again this is
> > > following the same crappy thread of you have no oil in your
> > > pan..wethere is was 0.1 quart of none that all pretty darn relatively
> > > close to 0, i have almost absolutely 0 body roll, i break my 275-40
> > > tires in the rear before my suspension gives.
> > >
> > > i would think you need - camber because as you turn, your inside tire
> > > will take on a positive camber if aligned to 0 deg camber.
> > >
> > >  Ryan
> > 
> > Just out of curiosity, what spring rates are you runnin?  And where are you
> > getting the stress cracks?  i'm running some pretty hard springs, and want
> > to know where to look for cracks.
> > 
> >         No sway bars on the car yet, but soon.
> > 
> >                 TIA
> > 
> > Owen
> > 87 16v
> > http://www.geocities.com/MotorCity/Garage/1571
> > 
> > --
> > To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> > with your request (subscribe, unsubscribe) in the BODY of the message.
> 
> 

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.