[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cold Starting
Umm, control pressure regulator? AKA warm up regulator.
-Paul
At 10:04 AM 11/5/98 -0500, Joel Leclerc wrote:
>I don't have any problem with cold start, even if it's getting cold here!
>
>I had more problem during summer time with warm start, the first start
>is fine, but if the engine run enough to get warm and I try to start
>after that, then it will take more time to restart.
>
>Look like my problem is the reverse of yours!
>
>Anyone can explain that?
>
>thx
>/Joel
>8716v
>
> ''''
> 0 0
>+-----------------------------ooO--(__)--Ooo--------------------------------+
> VVV ==fahrvergnugen=== VVV
> WWW Volks WWW
>
> ---------------- FAHRVERGNUGEN FOREVER! --------------------
> The fact that I need to explain it to you indicates
> that you probably wouldn't understand anyway!
> .oooO
> ( ) Oooo.
>+--------------------------------\ (---( )-------------------------------+
>http://www.info.polymtl.ca/~deejay\_) ) / deejay@info.polymtl.ca
>Finger for PGP public key. (_/ Pager: 851-JOEL
>Key fingerprint = 74 87 D1 1A 64 0B E5 7D D1 C0 22 D9 FD 61 4B C5
>
>On Thu, 5 Nov 1998, Benjamin Harder wrote:
>
>> It is now getting pretty cold here in Cincinnati, OH. The morning
>> temperatures
>> are only in the 30's. Well, it seems that my 16v doesn't like these cold
>> starting
>> temperatures. I am having no trouble at all cranking...and cranking. The
>> engine
>> will turn over for about 5 seconds or more before firing. Then, once it
>> fires, the
>> engine runs just fine. I tried replacing the ground cable with a thicker
>> wire to see
>> if this could help, but it really hasn't helped the cold start. Does
>> anyone with a
>> 16v have similar problems?
>>
>>
>>
>>
>>
>> Benjamin Harder
>> 86.5 Scirocco 16v
>> http://members.xoom.com/Scirocco16v
>>
>> --
>> To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>> with your request (subscribe, unsubscribe) in the BODY of the message.
>>
>
>
>--
>To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>
--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.