[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Injector O rings.
this is *exactly* how i bent two injectors (and all 4 lower inserts).
if they are petrified, you have to pry so hard that you can't pull it
out straight out. all i can say is be CAREFUL... by the way, the
puller is only $6 from i think potterman?
chris
86 16V scirocco
>----------
>From: Mark Langford[SMTP:langford@hiwaay.net]
>Sent: Thursday, December 31, 1998 5:51 AM
>To: 'Scirocco List'
>Subject: Re: Injector O rings.
>
>Removing injectors? I use a Stanley "Nail Puller", a flat crowbar-like
>piece of flat steel with a 90 degree bend on one end designed to pull nails.
>It's cheap, and works perfectly on both 16V and 8V engines by using the
>valve cover to leverage against. It has a nottch for the nail which
>straddles the injector nicely. Be careful to exert a little force on the
>injector to ensure that it's trying to come straight out, rather than in a
>bind.
>
>Mark Langford, Huntsville, Alabama
>mailto:langford@hiwaay.net
>see KR2S project N56ML at http://home.hiwaay.net/~langford
>
>
>
>
>--
>To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>
--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.