Re: passenger side motor mount

[skerocdriver@juno.com (Shawn C Meze)]

On Sat, 26 Dec 1998 14:24:07 -0500 Joshua Johnson <carinfo@ngc.edu>
writes:
>I've got an 88 16v and I'm replacing the driver and passenger side motor
>mounts. The problem, as you can tell by the subject, is with the
passenger side
>mount...my question is how many bolts are holding the mount bracket to
the
>block. 


There are 4 bolts holding the mount to the block. I know a couple are
burried behind the timming cover. 
Standing at the passenger side fender and looking at the mount, there are
2 bolts to the left of and close to the motor mount, and two bolts about
3" to the right of the mount. These bolts are stacked one atop of the
other. (reference.) One of the bolts on the right is a stud for the
timming belt cover. (FYI.)
HTH!


              Shawn Meze
86' Jetta GLi           82' Scirocco GTi
The Fastest, Quickest, Cleanest and
best looking Scirocco in all of San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.