[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: oil pressure sender
- Subject: Re: oil pressure sender
- From: brett@kodak.com (Brett VanSprewenburg)
- Date: Mon, 24 Aug 1998 11:52:55 -0400
> anyone put an oil pressure gauge in their 16v?.....i wanted to put one on
> mine, but the sender from my previous 8v doesn't appear that it will have
> clearance(mounted on teh side of the head, like the 8vs had em...maybe it
> does..but it looks like a tight fit......i have seen
> some audi 4000's that had similiar set ups, but had a sender screwed into
> the top of the oil cooler.......is it possible to do this on the 16v?
>
> dave
Yes, this is where the dual replacement sender goes on the 16v, use one of
the sender postions on top of the oil cooler/oil filter housing. Replace the
stock sender that matches one of the values stamped into the side of your
dual sender.
==Brett
--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.
------------------------------