[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Changing Speedometer mileage
- Subject: Re: Changing Speedometer mileage
- From: "Wm. Josiah Erikson" <josiah@gsinet.net>
- Date: Sat, 22 Aug 1998 08:28:59 -0400
No kidding... fascinating....
I'll have to try that on my '86, which has a 16v cluster in it. I'm going to
take the 16v cluster out of it eventually, because it doesn't need to be there
and is worth a little bit of money, but hmmm...
-Josiah
Anthony Pelletier wrote:
> Date: Fri, 21 Aug 1998 20:40:26 -0400
> From: "Wm. Josiah Erikson" <josiah@gsinet.net>
> To: Scirocco List <scirocco-l@scirocco.org>
> Subject: Re: Changing Speedometer mileage
>
> according to Potterman all you have to do is swap the end gear off
> the spedo cable. some day i'll fix mine and be sure that it works
>
> Tony
>
> You know that if you do this, you're speedo will show the wrong speed, right?
> The final drive ratios on 16v and 8v trannies are different... (I know it's
> more complicated than that, as in there are lots of different final drive
> ratios, depending on what tranny you have, etc...)
> -Josiah
>
> John C. Worden wrote:
>
> > Does anyone know how/ or have they changed the mileage on a speedometer?
> > I'm asking this because I want to use a 16v speedo and cables in my
> > Scirocco because 1. I'm going to running larger diameter wheels/tires 2 it
> > goes up to 140mph and 3. I would like for the mileage on the oddometer to
> > be accurate if possible. Yes I connected the tip of the gear(that goes
> > into the tranny) to my drill and tried that, but I don't think it's worth
> > 1000 hours on the drill to move it 14k miles. Any ideas?
> >
> > John '98 Dak cc Sport 4x4, 3.9 auto, Intense Blue, Leer Classic tonneau,
> > Pioneer DEH-P85DHR, ventshades, headlight/tailight covers
> > '84 Scirocco (under construction)
> > '69 MGB Roadster(in need of restoration)
> > --
> > To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> > with your request (subscribe, unsubscribe) in the BODY of the message.
>
> --
> To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> with your request (subscribe, unsubscribe) in the BODY of the message.
--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.
------------------------------