Re: Amp installation location

["lerb" <lerb@redrose.net>]

Opps forget my post! Its going to look like I read this one and typed it
again in my own words....BTW great idea!! hehe
-----Original Message-----
From: Brad Sheridan <brads@mindspring.com>
To: <scirocco-l@scirocco.org>
Date: Tuesday, August 18, 1998 8:14 PM
Subject: Re: Amp installation location


>At 07:42 PM 8/18/98 -0400, you wrote:
>>Hey Guys:
>>
>>Sheesh, I have been busy with this installation of my audio system. Now, i
>>have two amps that I would like to mount to the sides of the hatch area.
>>Anyone done this b4? I am kinda curious to see how it worked out. The amps
>>are pretty small. I have to go out and check the available space, but if
>>anyone has done this already, gimme a jingle.
>
>  I had it done on my previous Scirocco. It involved making a board that
>went flush from the side part of the parcel shelf down to the floor of the
>hatch, at a slight angle so that it goes to the metal part of the hatch,
>and not the rubber around the wheel well area. The bottom was held in with
>an L bracket. The top was held in by screwing some wood screws through the
>lip of the parcel shelf side piece and into the board. Once you get this
>figured out, its easy enough to cut out pieces of the board to mount the
>amps flush on the board, carpet it, and you're in business. The finished
>piece actually looked pretty good, considering how simple it is.
>Unfortunately, I don't have any pics to scan in.
>
>Brad
>
>--
>To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------