[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [exterior Mk2] Mono-wiper Conversion
- Subject: Re: [exterior Mk2] Mono-wiper Conversion
- From: Ewan Marshall - Frans Maas Linlithgow <Ewan.Marshall@UK.Sun.COM>
- Date: Sat, 8 Aug 1998 01:44:29 +0100 (BST)
Leave the original rubber washer in,and fill in the hole with a smaller
,easier to find rubber plug.I have a 21" wiper on my 89' Scala.Looks
tastey!
Ewen.
From: "faust" <faust@gateway.net>
To: <6keb1@qlink.queensu.ca>, <scirocco-l@scirocco.org>
Subject: Re: [exterior Mk2] Mono-wiper Conversion
X-MSMail-Priority: Normal
X-Priority: 3
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
> When converting a dual-wiper'd Mk2 to a mono-wiper,
> what have you folks used to plug the extra wiper
> hole left over?
I've heard of people using handlebar plugs available at any bicycle
shop.
I don't have any body kit
> plugs handy...
Sorry, I didn't have a chance to get a body kit plug to you. I do have
one
but it is on my parts car which is in storage about 11/2 hours away.
We've
been real busy with the move and all.
> What is the stock mono-wiper size? 20"?
I'm not sure about the 82/83s that originally came with the mono-wipe,
but
I know that the largest size I can get on my 88 is 18". It does a good
job. I know that they are different because the center mounting hole is
actually about an inch different from the duals to the monos.
>
> Thanks,
>
> p.s. Thanks again Greg (Faust) for the mono-wiper!
Good luck with it. Let me know how it turns out.
Cheers,
Greg Faust
>
> ---
> Kareem
> '88 16v
> 6keb1@qlink.queensu.ca
> --
> To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
> with your request (subscribe, unsubscribe) in the BODY of the message.
--
To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.
--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.
------------------------------