"Ryan Schuermann" <rts@phoenix.net>: tech: welding on the block help

[mark.peele@juno.com (Mark A. Peele)]

I don't believe you can weld to iron.
__________________________________________________________
 . . . Mark
Scirocco 1982, 1980S (dying), previously 1981S (RIP), 1975TS, 1975
--------- Begin forwarded message ----------
From: "Ryan Schuermann" <rts@phoenix.net>
To: scirocco-l@privateI.com
Subject: tech: welding on the block help
Date: Tue, 18 Nov 1997 21:09:49 +0000
Message-ID: <199711190405.WAA17717@virtual4.c-com.net>

well, her'es my problem, on my 1.8L block i'm missing
the bolt-hole that the power steering pump rear bracket
bolts onto. I have the short bolt one but the long bolt hole,
the one to the passenger side, near the corner of the block is 
snapped off. So my ps pump puts a lot of torque on this
and i've snapped 2 of those big brackets...Is there any way to
weld onto the block? I don't think so because it's cast, and porus 
metal right? Also the bummer deal is..it's also broke on my 2.0L
block, so I need a good fix for both blocks. Also is there a belt
I can use to just connect the water pump to the crank, and maybe
convery my car to an older style rack and pinion assisted steering,
I know it's not power steering but it's a little better than 
no-steering.

thanks

Ryan
--
To subscribe or unsubscribe, send email to
scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.

--------- End forwarded message ----------
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.