Re: Strut tool

["I.Mannix" <mannix@privatei.com>]

>ok, its been said that a1's dont have that slotted nut, but just for you all
>to know my friend developed a great way to make the tool.  Go out and buy a
>cheapy 14mm socket.  cut down on the two sides with a hacksaw/ diegrinder and
>leave two "teeth" across from one another.

Great idea, but don't forget to use a DEEP socket - a not so clever friend
of mine once made one of these out of a shallow socket, uhh, wizard.  FWIW!


Mannix

 woohoo You have a wonderful tool
>that works great.  If you dont understand you would once you see the nut.
> otherwise they usually arent all that tight so you can spin it around with a
>flat screwdriver and hammer, but that takes longer.  Just thought this
>wonderful system should be shared to you guys, you might need it someday.
>
>Kyle
>
>--
>To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
>with your request (subscribe, unsubscribe) in the BODY of the message.







--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.