Re: Speedo

[mark.peele@juno.com (Mark A. Peele)]

I lubed mine with axle grease (on each end of the cable)  - 
my car has two cables:
one goes from the speedo to a "black box" in the engine compartment
the other goes from the black box to the trans

Before i'd do that, i'd make sure the speedo cable is snugly attached to
the rear of the speedo - if that don't work, try the lube.
__________________________________________________________
 . . . Mark
Scirocco 1982, 1980S (dying), previously 1981S (RIP), 1975TS, 1975 (they
don't look like Deloreans - or any other car made)

On Mon, 8 Dec 1997 14:08:15 -0700 rabeys@cadvision.com (Sean Rabey)
writes:
>>First guess: the speedo cable is not properly attached . . .  (or is
>>binding - lubricate it)
>>__________________________________________________________
>> . . . Mark
>
>        What would you use, good old WD-40?  And where would one lube, 
>just
>on the part that plugs into the back of the speedo?
>
>Thanks
>                                        Owen
>                                        87 16V
>
>                                
>
>
>--
>To subscribe or unsubscribe, send email to 
>scirocco-L-request@privateI.com,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.