[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
cooler car
- To: scirocco-l@privatei.com
- Subject: cooler car
- From: "Ryan Schuermann" <rts@phoenix.net>
- Date: Wed, 20 Aug 1997 18:37:39 +0000
- Comments: Authenticated sender is <rts@mail.phoenix.net>
- Organization: RTSystems
- Priority: normal
- Reply-to: rts@phoenix.net
- Sender: owner-scirocco-l
CAR: 1987 16v Scirocco
MOD: removed #2,3,5,6 grill slat counting from the top down
BEFORE: Temp needle while sitting in traffic would rise to 1/2mm
under the hot line. This is the very tip of the needle being just
under the highest temp line..not dot.
AFTER: Temp need itself never overlaps the high line, and at the base
of the needle (where it's closest to the line) its a full 1-2mm below
it. Highway driving sees about the same.
NOTES: I can't believe how much this helped cool my car down. I used
to have to use the fan while sitting in traffic, now my radiator can
breathe better, and I am assuming that the breeze now has better
access to it with those 4 slats missing. If you like the skinny-3-bar
look, then this mod is for you. I will have some pics up as soon as
the roll is finished and developed.
Ryan
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.