Re: 210 mm clutch

["Mike & Kristen Potter" <kmpotter@ix.netcom.com>]

You definetly need a flywheel , pp , & disc. You will also need new bolts
for attaching the flywheel to the pp. A total of 9 is needed PT#
N-100-134-01. Also do not forget about the timing mark on the flywheel
(esp if you still have the 1.6) the 190mm have the "V" cut at 3 deg ATDC ,
the 210mm have the "V" cut at 6 deg BTDC. So when you have them both out
just compare & make your own notch for your motor. 
later
Potterman

----------
> From: Jay Docherty <jdoc@postoffice.ptd.net>
> To: scirocco-l@privatei.com
> Subject: 210 mm clutch
> Date: Monday, April 07, 1997 7:40 AM
> 
> Will the 210 mm clutch fit in a 80 scirocco trans without any 
> problems?  Do you have to get a different fly wheel or anything?
> 
>                                       Jay
> '80 Scirocco 8v
> '88 Scirocco 16v
> 
> Check out the Watercooled VW gallery...
>              http://idt.net/~volkswgn
> --
> To subscribe or unsubscribe, send email to
scirocco-L-request@privateI.com,
> with your request (subscribe, unsubscribe) in the BODY of the message.
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.