Re: Help - clutch failure

["John K. Gates" <john@fang.cs.sunyit.edu>]

On Sat, 17 Aug 1996 Mute0@aol.com wrote:

> thanks alot for all you're help - 
> so what you're saying was you're problem was that the cable chewed through
> its insulation giving it 1" of freeplay - thereby throwing out one of the
> bearings?
> How did you get to you're transmission to check the bearing?

You can remove the end of the transmission, the small section most distant
from the engine, and the bearing will be there. You probably want to drain
the gear oil first; there's a plug on the bottom of the differential housing
that takes a 17mm allen wrench. The filler is on the very end of the
transmission and is of the same type head..

John K. Gates, UNIX Systems Administrator/Software Engineer
john@fang.cs.sunyit.edu, http://www.cs.sunyit.edu/~john

--
To subscribe or unsubscribe, send email to scirocco-l-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.